Sustainable Manufacturing and Recycle Technology(SMART) Activities
 |
 |
| Short brief by representatives of MyInnovation Hub (MIH) - Vincent Wong, Deputy Vice Chancellor - Professor Hashim Saim | Short brief by representatives of MyInnovation Hub (MIH) - Vincent Wong, Deputy Vice Chancellor - Professor Hashim Saim |
 |
 |
| Said Ahmad Viva. Examiners Professor Yusri Yusuf (UTHM) and Professor Erry (IIUM) | Said Ahmad Viva. Examiners Professor Yusri Yusuf (UTHM) and Professor Erry (IIUM) |
 |
 |
| Taklimat permohonan geran penyelidikan untuk staf Pusat Pengajian Diploma UTHM - 20 Jan 2015 | Taklimat permohonan geran penyelidikan untuk staf Pusat Pengajian Diploma UTHM - 20 Jan 2015 |
 |
 |
| Lawatan ke Pusat Pengurusan Penyelidikan (RMC) UTM Skudai, 18 Jan 2016 |
Taklimat permohonan geran penyelidikan untuk staf Pusat Pengajian Diploma UTHM - 20 Jan 2015 |
 |
 |
| Workshop on 'Foresight Halatuju Penyelidikan UTHM' at Bangi Gateway Shopping Mall, Bangi, talked given by MIGHT and Platcom Ventures representatives - Dr Viraj Perera and Mr Nurul Azammi | Bengkel Halatuju Institute of Integrated Engineering UTHM bersama Professor Dato Dr Khalil (USM), Hotel Mahkota Melaka, 13-15 Dec |
 |
 |
|
Keynote speaker by Assoc. Prof. Dr Mohd Amri Lajis |
Keynote speaker by Assoc. Prof. Dr Mohd Amri Lajis 6th International Conference on Mechanical and Manufacturing Engineering (ICME 2015) 19 – 21 October 2015 | Universiti Tun Hussein Onn Malaysia |
 |
 |
| Kursus Response Surface Methodology (RSM) 11 Jun 2015 - Dewan 5, UTHM |
Kursus Response Surface Methodology (RSM) 11 Jun 2015 - Dewan 5, UTHM |
 |
 |
| Kursus Response Surface Methodology (RSM) 11 Jun 2015 - Dewan 5, UTHM |
Kursus Response Surface Methodology (RSM) 11 Jun 2015 - Dewan 5, UTHM |
 |
 |
| Ceramah mantan TPM Tun Musa Hitam - 'Mendepani Isu dan Cabaran Global' | Ceramah mantan TPM Tun Musa Hitam - 'Mendepani Isu dan Cabaran Global' |
 |
 |
| Pelancaran 'University Center Transformation Community' UCTC di Pagoh | Pelancaran 'University Center Transformation Community' UCTC di Pagoh |
 |
 |
| Taklimat pengurusan geran penyelidikan banjir 2015 by KPM Putrajaya | Taklimat pengurusan geran penyelidikan banjir 2015 by KPM Putrajaya |
 |
 |
| Bengkel penulisan buku oleh Dewan Bahasa dan Pustaka disampaikan oleh penulis buku terkenal negara Dr Jeniri Amir | Bengkel penulisan buku oleh Dewan Bahasa dan Pustaka disampaikan oleh penulis buku terkenal negara Dr Jeniri Amir |
 |
 |
| Penceramah dan Fasilitator di Bengkel Permohonan Geran Penyelidikan FRGS 2015 yang dianjurkan oleh Bahagian Pengurusan Politeknik, Kem. Pendidikan Malaysia, Putrajaya. | Penceramah dan Fasilitator di Bengkel Permohonan Geran Penyelidikan FRGS 2015 yang dianjurkan oleh Bahagian Pengurusan Politeknik, Kem. Pendidikan Malaysia, Putrajaya. |
 |
 |
| Lawatan ke Pilot Plant produk farmasi UIA, Kulliyah of Pharmacy | Lawatan ke Pilot Plant produk farmasi UIA, Kulliyah of Pharmacy |
 |
 |
| Malaysian Technology Expo 2015, PWTC | Talk by Tan Sri Professor Dzulkifli Razak |
 |
 |
| Attending a seminar on World Performing Universities | Attending a seminar on World Performing Universities |
 |
 |
|
BPKI Research Mgmt Center (RMC) of IPTA |
BPKI Research Mgmt Center (RMC) of IPTA |
 |
 |
|
Panel Examiner for Kolokium RACE (Research Acculturation Colloborative Efforts) |
Panel Examiner for Kolokium RACE (Research Acculturation Colloborative Efforts) |
 |
 |
| Seminar on Hazardous Waste Management and meeting with ENSEARCH members, Kota Damansara KL. | Bengkel Pemantapan Pusat Kecemerlangan UTHM (CoE) & Perancangan Penyediaan Bajet 2015 |
 |
 |
|
Anugerah Insentif Khas Naib Canselor |
Anugerah Insentif Khas Naib Canselor Prof. Madya. Dr. Mohd Amri bin Lajis |
 |
 |
| Workshop on Fracture Mechanics and Mechanism by Prof. Dr. Nasir Tamin (UTM) 20 - 21 Oct 2014 | Registrar Office, UTHM |
Workshop on Fracture Mechanics and Mechanism by Prof. Dr. Nasir Tamin (UTM) 20 - 21 Oct 2014 | Registrar Office, UTHM |
 |
 |
| Mesyuarat Timbalan Naib Canselor (Penyelidikan dan Inovasi) IPTA di Universiti Sains Islam Malaysia (USIM), Nilai bersama Prof. Dr. Wahid Razzaly |
Lawatan ke Inno Biologics Sdn Bhd, Nilai bersama Timbalan Naib Canselor (Penyelidikan dan Inovasi) Prof. Dr. Wahid Razzaly |
 |
 |
|
Bengkel Penyediaan Kertas Cadangan Penyelidikan dan Pemantapan Pengurusan Penyelidikan dan Pembangunan (R&D) UTHM |
Bengkel Penyediaan Kertas Cadangan Penyelidikan dan Pemantapan Pengurusan Penyelidikan dan Pembangunan (R&D) UTHM Hotel Selesa, Johor Bahru |
 |
 |
|
Assoc. Prof. Dr Mohd Amri with Prof. Dr. I.S. Jawahir |
Assoc. Prof. Dr Mohd Amri with Prof. Dr. Noordin bin Hj. Mohd. Yusof and Assoc. Prof. Dr. Yusri Yusuf 12th Global Conference on Sustainable Manufacturing UTM, Johor | 22 – 24 September 2014 |
 |
 |
| Siti Salwa binti Khamis, Master Studies Student presenting at 12th Global Conference on Sustainable Manufacturing UTM, Johor | 22 – 24 September 2014 |
Syaiful Nizam bin Ab Rahim, PhD Studies Student presenting at 12th Global Conference on Sustainable Manufacturing UTM, Johor | 22 – 24 September 2014 |
 |
 |
| Workshop on Taguchi Robust Design by Assoc. Prof. Dr. Khairur Rijal bin Jamaludin (UTM) 17 - 18 Sept 2014 | Registrar Office, UTHM |
Workshop on Taguchi Robust Design by Assoc. Prof. Dr. Khairur Rijal bin Jamaludin (UTM) 17 - 18 Sept 2014 | Registrar Office, UTHM |
 |
 |
| Presenter for Bengkel Hala Tuju Institut Ahli Sunnah Wal Jamaah Negeri Johor 2014 - MSuite Hotel JB |
Presenter for Bengkel Hala Tuju Institut Ahli Sunnah Wal Jamaah Negeri Johor 2014 - MSuite Hotel JB |
 |
 |
|
Attend DEFORM training (simulation software) training at |
Attend DEFORM training (simulation software) training at CAD-IT Consultant in Petaling Jaya. 25-27 August 2014 |
 |
 |
| Best Paper Award in International Conference on Global Trends in Academic Research (GTAR 2014), Bali, Indonesia, 2-3 June | International Conference on Global Trends in Academic Research (GTAR 2014), Bali, Indonesia, 2-3 June |
 |
 |
| Forum on Environmental Management (FEM 2014) under ENSEARCH program at Kelab Golf Negara Subang |
Forum on Environmental Management (FEM 2014) |
 |
 |
| 3R Int. Conf. of Materials Cycle and Waste Mgmt 2014, Centennial Hall, Kyoto University, 10 March 2014 | Technical visit to automobile and biodisel recycling plants at Okayama City, Japan, 10 March 2014 |
 |
 |
| Site visit to Simpang Renggam disposal landfill with Southern Waste management Sdn. Bhd. | Site visit to Simpang Renggam disposal landfill with Southern Waste management Sdn. Bhd. |
 |
 |
| Site Visits for monitoring the implementation of MTUN CoE Research grant | Site Visits for monitoring the implementation of MTUN CoE Research grant |
 |
 |
| Academic visit with Phd and Msc students to Hydro Aluminium (Pasir Gudang) for MTUN research grant. | Photo with Profesor Dato' Dr Nik Muhamad (UPM), AP Dr Nafarizal (UTHM), Dr Hasan (UTHM) and MyGrant system consultant at FRGS grant workshop, UTHM, 28 Aug 2013 |
 |
 |
| With delegates from Institute of Space Science, Pakistan | Research collaboration meeting with wood industrial company Evergreen Sdn Bhd at UTHM research management center |
 |
 |
| Attending Global Conference Sustainable Manufacturing (GCSM 2013), Berlin, Germany, 18-27 Sept 2013 | Workshop of FRGS grant application and training for trainer (TOT) for UTHM panel examiners which were trained by two panel experts from Ministry of Education - Prof Dato' Dr Nik Muhd (UPM) and Prof Dr Mohd Fauzi (UKM). |
 |
 |
| Research University Performance Forum at Pan Pacific, Singapore, 9-11 April 2013 |
Research talk on 'Sustainable Manufacturing' by Profesor I.S. Jawahir, University of Kentucky, USA, at ORICC, UTHM |
 |
 |
| Attending conference ISWA World Congress 2013, Vienna | Review the scope of MOU between UTHM and Johore Biotechnology Corp at J-Biotech, JB. Specific area to be covered wil be on 'The Conservation of Natural Resources in Johore' which is led by Prof Dr Datin Maryati and her team |
 |
 |
| Indian Institute Of Technology, Chennai, Tamil Nadu, India | Photos with Shin Taguchi (son of late Dr Genichi Taguchi, Founder of Taguchi Method), Prof Shari, Prof Nordin n Dr Rozzeta. Taguchi Method Workshop, UTM KL, 22-23 April |
 |
 |
| Letter of Intent (LOI) signed between UTHM and NTU which represented by Deputy Vice Chancellor, Professor Dr Wahid Razaly (UTHM) and Professor Dr Zhong (NTU). | Photo with Prof Ir Dr Shahril (EAC chairman), EAC team panel examiners and UMP faculty members. Engineering Accreditation Council (EAC) assestment at Universiti Malaysia Pahang (UMP),28-29 May 13 |
 |
 |
| Photo with Global Conference Sustainable Manufacturing (GCSM 2013), Berlin, Germany, 18-27 Sept 2013 | Seminar related on 'Solid Waste Mgmt and Recyling Bank' which was delivered by two officers from Pusat Pengurusan Sisa Pepejal Awam Msia (PSPPA) |
 |
 |
| Visit European Center, NUS Singapore |
Collaboration PhD supervision with Proffesor Dr. Zhong |