Print

Funding For Collaborations

Written by mokhtar a.hamid. Posted in Business Engagement

 Funding For Collaborations

 

 Sustainable Polymer Engineering ( Associate Professor Dr Anika ZAfiah Mohd Rus )

 

No

Project Title

Grant Type

Amount

1

Optimization Of Biopolymer Membranes For Medical Textiles

GIPS - 0978

RM 13,000.00

2

Neutralizing Free Radical Of Automotive Gaseous Emission Via Textiles Laminated Green Coating : Acoustic And Experimental Study Based On Formation of Free Radical of Laminated Textiles Green Coating

MTUN-COE - C015

RM 85,400.00

3

Neutralizing Free Radical Of Automotive Gaseous Emission Via Textiles Laminated Green Coating Tajuk Projek : Synthesis Of Green Polymer And Laminated Textile Composite

MTUN-COE - C014

RM 213,000.00

4

Synthesis Of Economical And Green Xylitol From Biomass In Enzymatic Membrane Reactor By Locally Produced Xylose Reductase : Degradation Of Natural Polymer From Biomass To Xylose

MTUN-COE - C018

RM 61,600.00

5

Bio Coating For Neutralizing Superoxides Of Automotive Gasseous Emission To Improve Enviroment Air Quality

GIPS - 1026

RM 19,500.00

6

Investigation On Organic Dye Sensitised Titanium Dioxide For Solar Cell Energy Conversion

FRGS

RM 103,000.00

7

A New Construction Materials Based on Agregation of Textiles (used cotton clothing) and Limestone Powder Wastes

FRGS

RM 36,000.00

8

The Novel Continues Biodiesel Proces Using Ultrasound Clamp On Tubular Reactor

PRGS - 0903

RM 160,000.00

9

Influnce Of Hot Compression Moulding Of Biopolymer Filled Waste Granulate Biopolymer

GIPS - 1122

RM 13,000.00

10

Biofoam Exploration From Renewable Resources

ERGS - E018

RM 96,000.00

11

Damping Characteristic of High Density Solid Waste Biopolymer Foam

GIPS 1200

RM 15,300.00

 

 

Sustainable Manufacturing and Recycling Technology ( Associate Professor Dr Amri Lajis)

 

 RESEARCH GRANT FUNDED :
    No              

Activities

      1 Modelling and Simulation in Support and Construction of Business Driven Manufacturing Automation Systems.

Source: IRPA grant, MOSTI, 03-02-13-0002-EA001, Cost - RM 150k

Duration: 2 years (2002 – 2004), Status: Completed

      2 Enhancement of Machinability of Hardened Steels in End Milling Using Advanced Cutting Methods and Tools

Source: Esciencefund grant, MOSTI, 03-01-08-SF0003, Cost - RM 178,450k 

Duration: 2 years (Dec 2006 – Dec 2008), Status: Completed

      3 Sustainability of e-product recycling: propose national framework, model, and policy

Source: FRGS grant, MOHE, FRGS/2/2010/TK/UTHM/02/19, Cost - RM 34,830k 

Duration: 2 years (Sept 2010 – Aug 2013), Status: in-progress

      4

Direct recyling of automotive scrap material (Al6061) in high speed machining process – propose waste to resources  

Source: FRGS grant, JPT.S(BPKI)2000/09/01Jld.11(50), Cost - RM 76k 

Duration: 2 years (Julai 2011 – Jun 2013), Status: in-progress

      5 Kajian ‘Graduate Employability’ Graduan UTHM

Source: Alumni CARE UTHM grant, E15108, Cost - RM 100,000k

Duration: 4 months (01 Sept – Dec 2010), Status: Completed.
      6 High productivity in electrical discharge machining (HPEDM) of difficult-to-cut materials

Source: ERGS grant, JPT.S(BPKI)2000/09/01/018(49), Cost - RM 126k

Duration: 2 years (01 Aug 2011 – July 2013), Status: in-progress
      7

Sustainable Integrated Direct Recycling of Aluminium Industrial Waste

Source: MTUN-COE grant, Cost - RM 439k

Duration: 2 years (01 June 2012 – May 2014), Status: in-progress

      8

Characterization Of Mist Flow Of Minimal Quantity Lubrication Technique In Machining Process:  

Source: FRGS grant, MOHE, Cost - RM 80k 

Duration: 2 years (Sept 2012 – Aug 2014), Status: in-progress

      9

Enhancing Bio Based Lubricant Production Through Innovative Research Tajuk Projek : Potential Use Of The Derived Synthetic Esters As Biolubricants In Machining Applications 

Source: MTUN-COE grant, Cost - RM 350k 

Duration: 2 years (01 June 2012 – May 2014), Status: in-progress

      10 

Sustainable Production Tooling Tajuk Projek :sustainable Machining Process Using Thermally Enchances Machining Technique

Source: MTUN-COE grant, Cost - RM 400k

Duration: 2 years (01 June 2012 – May 2014), Status: in-progress  

      11 

Exploring Improvements in EDM Machining of Tool Steels by Mixing Chromium and Vanadium Powders in Dielectric

Source: ERGS grant, Cost - RM 80k

Duration: 2 years (01 June 2012 – May 2014), Status: in-progress                                                                   

      12

Real-Time Monitoring On Manufacturing Control in Business Driven

Source: RMC grant, KUiTTHO, 04-02-02-0024, Cost - RM 30K

Duration: 2 years (2002 – 2004), Status: Completed

      13

Performance Evaluation of Cutting Tools When Machining Aerospace Materials

Source: RMC grant, KUiTTHO, 05-02-05-0024, Cost - RM 24K

Duration: 2 years (2005 – 2007), Status: Completed

      14

Comparison of Surface Roughness Between Non-Ferrous Metals At Low Constant Sliding Speed With Different Ball Diameters

Source: RMC grant, KUiTTHO, 05-02-05-0027, Cost - RM 15K

Duration: 2 years (2005 – 2007), Status: Completed

      15

The Using Manufacturing Cycle Time Information to Reduce The Time to Market of New Product

Source: RMC grant, KUiTTHO, 05-02-05-0198, Cost - RM 23K

Duration: 2 years (2005 – 2007), Status: Completed

      16

Surface modification in electrical discharge machining of tool steel using powder metallurgy electrode

Source: GIS grant, UTHM, Cost - RM 15,300        

Duration: 1 ½ years (01 Julai 2011 – 31 Dec 2012), Status: in-progress

      17

The Surface Morphology of AISI D2 Hardened Steel by the Electrical Discharge Machining (EDM)

Source: Short-term grant, UTHM, Cost - RM 10K

Duration: 1 year (15 Mac 2011 – 14 Mac 2012), Status: In-progress

      18

Tool wear performance and surface integrity in high speed milling of mold and die materials

Source: GIS grant, UTHM, Cost - RM 18,400K

Duration: 1 years (April 2011 – Mac 2012), Status: In-progress

      19

Direct recyling of automotive scrap material (Al6061) in high speed machining process – propose waste to resources

Source: GIS grant, UTHM, Cost - RM 15,300

Duration: 1 ½ years (01 Julai 2011 – 31 Dec 2012), Status: in-progress

 

Print

Consultancy

Written by mokhtar a.hamid. Posted in Business Engagement

CONSULTANCY/EXPERTISE SERVICES

Sustainable Manufacturing and Recycling Technology (Assoc. Prof. Dr. Mohd Amri Lajis)

1.Preparation and Development of New Silibus and Curriculum for Master Program             (Master in Mechanical      Engineering), Faculty of Mechanical and Manufacturing      Engineering, UTHM –    Mac 2004.

Role: Faculty Academic Committee (as Head of Dept)

 

2.Technical Committee Member on Evaluation of ‘Projek Penerbitan Buku - Manual            Keselamatan Syarikat’ for Syarikat Saidin Sdn. Bhd.: 17 – 18 Feb 2005

Client: Sykt.Saidin Sdn.Bhd. (up: En.Salman Othman) and TransferTechnology Center            (TTC), KUiTTHO.

Role: Consultant

 

                       

 

  1. Expert Review for Article of International Journal of the Advance Material Research         Journal Special Volume 2008 

 

                        Title of the paper: Optimization of Tool Life in Slot Milling of Titanium Alloys

 

  Authors of the papers: N. H. Elmagrabi, C. H. Che Haron,F.M. Shuaeib,       Jaharah A.Ghani.

 

  Reference number: M0036007

   

  1.    Expert Review for Article of International Journal of the Advance Material Research       Journal Special Volume 2008.

 

                        Title of the paper: Optimization of the Extrusion Process For Magnesium Alloy Sheets                                Using The Fuzzy-Based Taguchi Method

 

                        Authors of the papers: N Su-Hai Hsiang, Yi-Wei Lin

 

                        Reference number: CA0199022

   

  1.    Expert Review for Article of International Journal of the Advance Material Research       Journal Special Volume 2008.

 

                        Title of the paper: Application of Taguchi Method For The Multi-Objective Optimization     of               Aluminium Foam Manufacturing Parameters

 

                        Authors of the papers: R. Surace, L.A.C. De Filippis, A.D. Ludovico, G. Boghetich

 

                        Reference number: M0105029

   

  1. External Examiner of Post-Graduate Defend Proposal Viva Voice Under Faculty of          Management Technology, UTHM – 13 January 2010                             

 

   Title: Relationship between Malaysian cultural management perspective and       organizational quality performance

 

   Student: Nabilah bt. Ahmad (MSc.), Status: Passed with minor improvement

   

  1. External Examiner of Post-Graduate Defend Proposal Viva Voice Under Faculty of          Management Technology, UTHM – 09 February 2010                             

 

   Title: Cultural management and its impact on quality performance

 

   Student: Norhayati bt. Abd Rahman (MSc.), Status: Passed with minor improvement

   

  1. Preparation and Development of New Silibus and Curriculum for Master Program          (Master of Science in Nuclear Power Technology), Center for Post Graduate Studies, UTHM, 05 August 2010

 

                 Role: Committee member (Modul/subject in-charge: Nuclear Plant Operation and             Control )

   

  1. Preparation and Development of New Silibus and Curriculum for Master Program          (Master in Manufacturing Engineering), Dept. of Manufacturing and Industrial             Engineering, Faculty of Mechanical and Manufacturing Engineering, UTHM – 18 August     2010.

 

                 Role: Department academic panel member (Subject in-charge: Advanced             manufacturing technology)

   

  1. Expert Review for Article of International Journal of Computational Materials Science    and Surface Engineering (IJCMSSE), Inderscience publisher

 

                        Title of the paper: Optimization of Process Parameters by Taguchi Methodology During                 Electrochemical Grinding of Al2O3/Al – Interpenetrating Phase Composite.

 

              Journal Editor: Profesor Qingyou Han

 

                        Reference number: IJCMSSE-15763

   

  1. Expert Review for Article of International Journal of Scientific Research and Essays      (SRE)

 

                        Title of the paper: Cutting parameters effect on the surface roughness of end milling         process of Titanium alloys.

 

                        Authors of the papers: Dr. M. Siva Kumar, etc.

 

                        Reference number: SRE-10-102

   

  1. Internal Examiner of Post-Graduate Viva Voice Under Faculty of Mechanical and           Manufacturing Engineering, UTHM – 07 May 2010

 

  Title: Development of new method for reconstruction of destruction ear using rapid casting technique.                              

 

   Student: Noor Azizah bt. Sidek (MSc. by Coursework),      Status: Passed         with minor    improvement

   

  1. Internal Examiner of Post-Graduate Viva Voice Under Faculty of Mechanical and           Manufacturing Engineering, UTHM – 07 May 2010                             

 

   Title: The study of effect the different gate design by using investment casting

 

   Student: Said b. Ahmad (MSc. by Coursework), Status: Passed with minor        improvement

   

  1. Internal Examiner of Post-Graduate Viva Voice Under Faculty of Mechanical and           Manufacturing Engineering, UTHM – 07 May 2010                             

 

   Title: Effect of vortex-well design for sand casting

 

   Student:  Norfazilah binti Talib  (MSc. by Coursework),    Status: Passed            with minor    improvement

   

  1. Internal Examiner of Post-Graduate Viva Voice Under Faculty of Mechanical and           Manufacturing Engineering, UTHM – 07 May 2010                             

 

   Title: Effect of pouring temperature of aluminium alloy casting

 

   Student: Noor Anida bt. Abu Talib (MSc. by Coursework),  Status: Passed         with minor    improvement

   

  1. Visiting Lecturer of Internship student program for Faculty of Mechanical and      Manufacturing Engineering, UTHM – 12 February 2010              

 

   Place: Malay-Sino Chemical Industries Sdn. Bhd., Batu 4 ½ Jalan Lahad, 30750Ipoh,    Perak.

   

  1. Visiting Lecturer of Internship student program for Faculty of Mechanical and      Manufacturing Engineering, UTHM – 02 Jun 2010              

 

                                    Place: 8 factories in Penang and Kedah

   

  1. Visiting Lecturer of Internship student program (SLDN) for Faculty of Mechanical and    Manufacturing Engineering, UTHM – 17 Ogos 2010               

 

                                    Place: 4 factories in Selangor and Kuala Lumpur  

   

  1. Pre-assesment auditing and accreditation of MQA preparation documents (Certificate    and Diploma) for Institut Kemahiran Belia Negara (IKBN) Temerloh, Pahang: 10 to 11           Nov 2010.

 

            Role: MQA in-house auditor

   

  1. Expert Review for Special Issue of International Conference on Industrial            Engineering     and Operations Management 2011 (IEOM 2011) – 3 papers

 

              Title of the papers:

 

  1. A hybrid approach for CPLP with multicommodity flow (Paper ID: 123)
  2. Real-time tracking and tracing system: potentials for the logistics network (Paper ID: 134).
  3. Effective colour management for textile coloration – an instrumental way to perfection (Paper ID: 105)

     

  1. Internal Examiner of Post-Graduate Viva Voice Under Faculty of Mechanical and           Manufacturing Engineering, UTHM – 27 Sept 2010                             

 

   Title: Development of Wireless Mechanism to Reduce Wiring Complexities of Robot      Manipulator

 

   Student: Omar Abdel Aziz Mohamed Abdel Aziz (MSc. by Research),   Status:  Passed            with major improvement

   

  1. Chairmain of Post-Graduate Viva Voice Under Faculty of Mechanical and           Manufacturing Engineering, UTHM – 02 Nov 2010                             

 

   Title:

 

   Student: Noordiana bt. Kassim (MSc. by Research), Status: Passed with major  improvement

   

  1. Internal Examiner of Post-Graduate Viva Voice Under Faculty of Mechanical and           Manufacturing Engineering, UTHM – 03 Nov 2010                             

 

   Title: Study on cutting operation in turning process by 3D simulation using Deform          software

 

   Student: Mohd Zaim b. Mohd Zukeri (MSc. by Coursework), Status:Passed      with minor    improvement

   

  1. Internal Examiner of Post-Graduate Viva Voice Under Faculty of Mechanical and           Manufacturing Engineering, UTHM – 03 Nov 2010                              

 

   Title: The effect of runner diameter on the mechanical strength of Al-7Si-Mg (LM25)      alloy casting

 

   Student: Mohd Erfy b. Ismail (MSc. by Coursework),    Status:  Passed      with minor   improvement.

   

  1. Expert Review for Journal Article of Robotics and Computer Integrated Manufacturing   ,           Elsevier, Science Direct – 2011

 

   Title of the paper: Experimental Implementation And Analysis Of Robotic Metal  Spinning With Enhanced Trajectory Tracking Algorithms         

 

             Reference number: RCIM-D-10-00177

   

  1. Expert Review for Journal Article of Nonlinear Dynamics, Springer-link.            

 

   Title of the paper: Delaying Tool Chatter in Robotic Turning: Numerical Experiments       with a Two-Link Arm     - 2011

 

             Reference number: NODY2027

   

  1. Expert Review for International Journal of Nanomanufacturing (IJNM), Taylor-Francis.          

 

Title of the paper: Mathematical methods for optimizing high precision cutting operations – Oct 2011

 

             Reference number: NODY2027

   

  1. Expert Review for International Journal of Nanomanufacturing (IJNM), Taylor-Francis.            

 

Title of the paper: Mathematical methods for optimizing high precision cutting operations – Oct 2011

 

            Reference number: NODY2027

   

  1. Expert Review for International Journal of Nanomanufacturing (IJNM), Taylor-Francis.           

 

Title of the paper: Mathematical methods for optimizing high precision cutting operations – Oct 2011

 

             Reference number: NODY2027

   

  1. Engineering Accreditation Council (EAC), Engineering Accreditation Department (EAD) panel examiner board member for assesment exercise at Universiti Malaya, Kuala Lumpur – 9-10 April 2012.

   

  1. Engineering Accreditation Council (EAC), Engineering Accreditation Department (EAD) panel examiner board member for assesment exercise at Universiti Malaysia Pahang, Kuantan, Pahang – 28-29 May 2013.

          

  1.             Preparation of New Tender Specifications for New Eight of IKBN, Ministry of Youth and Sport (KBS) (RM 600 millions cost of the project excluding buildings, etc.): Phase-1, 2001-2002.

 

            Client: Project join-venture between Center of Research and Consultation, KUiTTHO and             Biro Inovasi dan Perundingan (BIP), UTM.

 

     Role: Technical Specification Consultant  

   

  1. Pre-acceptance, Installation and Commissioning of Delivery New Equipments for New Eight of IKBN, Ministry of Youth and Sport (KBS) (RM 600 millions cost of the project excluding buildings, etc.): Phase-2, 2002-2003.

 

            Client: Project join-venture between Center of Research and Consultation, KUiTTHO and             Biro Inovasi dan Perundingan (BIP), UTM.

 

     Role: Technical Specification Consultant  

   

  1. Pre-Delivery Inspection (PDI) for  New Eight of IKBN, Ministry of Youth and Sport (KBS) at AGCharmilles Technology at Geneva, Switzerland: 19 Jun – 28 Jun 2004

 

                             Client: Institut Kemahiran Belia Negara (IKBN), Ministry of Youth and Sport (KBS)

 

            Role: Technical Specification Consultant

   

  1. Preliminary Study on Electrical Prepaid Survey and Testing for TNB/Sykt. Thypoon: Jan 2005

 

            Client: Sykt Thypoon Sdn.Bhd., KL

 

            Role: Technical Consultant

   

  1. Rekabentuk sistem mekanikal pembersihan kerepek untuk syarikat Azhar Food Industries Sdn. Bhd.: July 2010 – July 2011

 

Role: 2 PSM students involved

   

  1. Rekabentuk sistem mekanikal keropok lekor untuk syarikat MSGBA Sdn. Bhd.: Nov 2010 – Jan 2011

 

Role: 4 PSM students involved

   

  1. Fasilitator of Preparation on New Tender Specifications for Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia International Campus, Kuala Lumpur, 2012 (RM 250 millions cost of the project excluding buildings, etc.).

 

            Client:  Biro Inovasi dan Perundingan (BIP), UTM.

 

     Role: Fasilitator and Technical Specification Consultant 

   

Print

Collaborations

Written by mokhtar a.hamid. Posted in Business Engagement

Collaborations

 

   
1.Deutscher Akademischer Austausch Dienst (DAAD) Scholarship Program

Research Grants for Doctoral Candidates at German Institution of Higher Education within the "Sandwich Scheme" Model 

 
Student  : Nur Kamilah Yusuf
Status  : Ph. D.s
Country of Origin  : Malaysia
Supervisor

 : Assoc. Prof. Dr. Mohd Amri Lajis (University Tun Hussein Onn, Malaysia) 

Co-Supervisor

 : Dr. -Ing. Marcel Weil (Karlsruher Institut of Technologie, German) 

 

1012928 10202503409618408 568986556 n  
2.Nanyang Technological University Singapore 

Letter of Intent (LOI) between NTU,Singapore and UTHM,Johor

 
Student  : Shazarel Samsudin
Status  : Ph. D.s
Country of Origin  : Malaysia
Supervisor

 : Assoc. Prof. Dr. Mohd Amri Lajis (University Tun Hussein Onn, Malaysia) 

Co-Supervisor

 : Assoc. Prof. Zhong ZhaoweiNanyang Technological University, Singapore)

      mok.jpg - 2.70 KB    

ORICC & Center of Excellent

ORICC

MiNTSRC logo recess LOGO EMC