Print

Publications

Written by mokhtar a.hamid. Posted in About Us

SUSTAINABLE MANUFACTURING AND RECYCLE TECHNOLOGY(SMART)

Related Publication

(1)Dissertation/Thesis/Monograf/Books (or chapter in books):

1.M.A. Lajis (1997). Study of Parameters of CNC EDM and The Designing of Graphite/Brass Technology. B.Sc. Eng. Dissertation, UTM, Malaysia.

2.M.A. Lajis (2001). Study on Machining Parameters Optimization in EDM of Tungsten Carbide Using The Taguchi Method. M.Eng. Thesis, UTM, Malaysia.

3.M.A. Lajis(2010). Preheated Machining of AISI D2 Hardened Steel and Optimization of Parameters. Phd Thesis, IIUM, Malaysia.

4.Buku polisi ICT Universiti (2010). Work under group of policy, scope, CIO chapters. Pusat Teknologi Maklumat, UTHM.

5.A.K.M. Nurul Amin, M.A. Lajis, A.N. Mustafizul Karim (2012). Heat Assisted Machining of AISI D2 Hardened Steels (2012). Copyright © by IIUM press, Malaysia. ISBN: 978-967-0225-79-1

6.A.K.M. Nurul Amin, M.A. Lajis (2012). Advanced Machining. Copyright © by IIUM press, Malaysia (Chapters in book).

  

(2)Academic/Technical/Research Reports

1.Enhancement of Machinability of Hardened Steels in End Milling Using Advanced Cutting Methods and Tools (2009). Esciencefund grant final report, MOSTI   

2.Kajian ‘Graduate Employability’ Graduan UTHM (2010). Graduate employability grant final report, CARE-UTHM.

 

(3)Articles in Newspaper/Magazine

1.Pengurusan mampan sisabahan buangan (Sustainable waste management). Mekanika, Buletin FKMP-UTHM, 3rd edition, Jan 2011.

2.Pengurusan mampan sisa bahan buangan – kitaran yang efektif dan bersih. Utusan Mingguan (to be submitted)

 

(4)Articles in Journal

1.Sulaiman Hasan, Mohd Amri Lajis, Zubailie Abdullah, Siti Norihan Hj Mu’ti (2004). Internet Based Supply Chain Management For Locals SMI. Jurnal Sains & Teknologi KUiTTHO, Jilid 01 (bil. 02).  

2.S.H. Salleh, Sulaiman Hasan, Mohd Amri Lajis (2005). The Development of Cyber Manufacturing System in KUiTTHO for SMIs Application. Jurnal Sains & Teknologi KUiTTHO, Jilid 02 (bil. 01).    

3.A.M.K. Hafiz, A.K.M.N. Amin, A.N.M. Karim, M.A. Lajis (2007). Development of Surface Roughness Prediction Model Using Response Surface Methodology in High Speed End Milling of AISI H13 Tool Steel. Transactions of IEEE, 1868–1872, DOI: 10.1109/IEEM.2007.4419516. Citation indexed by Science-Direct.

4.A.K.M. Nurul Amin, S. Dolah, M. Mahmud, M.A. Lajis (2008). Effects of Workpiece Preheating on Surface Roughness, Chatter and Tool Performance During End Milling of AISI D2 Tool Steel. Journal of Materials Processing Technology, 201, pp. 466-470, DOI:10.1016/j.jmatprotec.2007.11.304, © Elsevier B.V. Science-Direct.

5.Mohd Amri Lajis, H.C.D. Mohd Radzi, A.K.M. Nurul Amin (2009). The Implementation of Taguchi Method on EDM Process of Tungsten Carbide. European Journal of Scientific Research, ISSN 1450-216X, Vol. 26 No. 4, pp. 611-619, © EuroJournals Publishing Inc., London-UK. Citation indexed by Scopus.

6.Turnad L.Ginta, A.K.M. Nurul Amin, M.A. Lajis, A.N. M. Karim, Agus G.E. (2009). Tool life Assesment in End Milling Titanium Alloy (Ti-6Al-4V) Using PCD Inserts. International Journal of Science Engineering and Technology, Vol. 1, No. 1, ISSN: 1985-3785. ILRAM Publisher.  

7.L. Turnad Ginta, Mohd Amri Lajis, A.K.M. Nurul Amin (2009). The Performance of Uncoated Wc-Co Insert in End MillingTitanium Alloy Ti–6Al–4V Through Workpiece Preheating. American Journal of Engineering and Applied Sciences, 2 (1): 147-153, ISSN 1941-7020, © Science Publications, NY-USA. Citation indexed by Scopus.

8.M.A. Lajis, A.K.M. Nurul Amin, A.N. Mustafizul Karim, Turnad L.Ginta, H.C.D. Mohd Radzi (2009). Hot Machining of AISI D2 Hardened Steel with Coated Carbide Inserts. American Journal of Engineering and Applied Sciences, 2 (2): 421-427,ISSN 1941-7020, © Science Publications, NY-USA. Citation indexed by Scopus.

9.M.A. Lajis, A.K.M. Nurul Amin, A.N. Mustafizul Karim,AM.K. Hafiz (2010). Preheating in end milling of AISI D2 hardened steel with coated carbide inserts. Advanced Materials Research, Vol. 83-86 (2010) p.p. 56-66, © Trans Tech Publications, Switzerland, DOI: 10.4028/www.scientific.net/AMR.83-86.56.

10.A.K.M. Nurul Amin, A.M.K. Hafiz, M.A. Lajis, A.U. Patwari (2010). Prediction of tool life and experimental investigation during hot milling of AISI H13 tool steel. Advanced Materials Research, Vol. 83-86 (2010) p.p. 190-197, © Trans Tech Publications, Switzerland, DOI: 10.4028/www.scientific.net/AMR.83-86.190.

11.M.A. Lajis, A.K.M. Nurul Amin, A.N. Mustafizul Karim,Turnad L. Ginta (2011). Performance Evaluation of PCBN in End Milling of AISI D2 Hardened Steel Under Room and Preheated Machining Conditions. Advanced Materials Research, Vol. 264-265 (2011) p.p. 901-906, © Trans Tech Publications, Switzerland, DOI:10.4028/www. scientific.net/AMR.264-265.901.

12.A.N. Mustafizul Karim, M.A. Lajis, A.K.M. Nurul Amin (2011). Multi-criteria optimization in end milling of AISI D2 hardened steel using coated carbide inserts. Advanced Materials Research, Vol. 264-265 (2011) pp 907-912, © Trans Tech Publications, Switzerland, DOI:10.4028/www.scientific.net/AMR.264-265.907.

13.N.A.H. Jasni, M.A. Lajis (2012). Tool Wear Performance of TiAlN/AlCrN Multilayer Coated Carbide Tool in Machining of AISI D2 Hardened Steel. Advanced Materials Research, Vols. 488-489 (2012) pp 462-467, © Trans Tech Publications, Switzerland, DOI:10.4028/www.scientific.net/AMR.488-489.462

14.M.A. Lajis, A.K.M. Nurul Amin, A.N. Mustafizul Karim (2012). Surface Integrity in Hot Machining of AISI D2 Hardened Steel. Advanced Materials Research, Vol. 500 (2012) pp 44-50 © Trans Tech Publications, Switzerland, DOI:10.4028/www.scientific.net/ AMR. 500.44

15.M.F. Abdul Hamid, M.A. Lajis, (2012). High Performance in EDM Machining of AISI D2Hardened Steel. Advanced Materials Research, Vol. 500 (2012) pp 259-265 © Trans Tech Publications, Switzerland, DOI:10.4028/www.scientific.net/AMR.500.259

16.N.A.H. Jasni, M.A. Lajis (2012). A Comprehensive Study on Surface Roughness in Machining of AISI D2 Hardened Steel. Advanced Materials Research, Vol. 576 (2012) pp 60-63, © Trans Tech Publications, Switzerland, DOI: 10.4028/ www. scientific. net / AMR .576.60

17.Turnad L. Ginta, A.K.M. Nurul Amin, M.A. Lajis (2012). Suppressed Vibrations During Thermal-assisted Machining of Titanium Alloy Ti-6Al-4V Using PCD Inserts. Journal of Applied Sciences, © Asian Network for Scientific Information, ISSN 1812-5654/DOI: 10.3923/jas.2012.

18.Faizul Ezmat Abdul Hamid, M.A. Lajis (2013). Effects of High Performance EDM on Surface Characteristics of AISI D2Hardened Steel. Applied Mechanics and Materials,  Vol. 315 (2013) pp 846-850 © (2013) Trans Tech Publications, Switzerland doi: 10.4028/ www.scientific.net/AMM.315.846

19.N.K. Yusuf, M.A. Lajis, M.I. Daud, M.Z. Noh (2013). Effect of Operating Temperature on Direct Recycling Aluminium Chips (AA6061) in Hot Press Forging Process. Applied Mechanics and Materials, Vol. 315 (2013) pp 728-732 © (2013) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/AMM.315.728

20.N.A.H. Jasni, M.A. Lajis (2013). Surface Topography in Machining of AISI D2 Hardened Steel. Applied Mechanics and Materials, Vol. 315 (2013) pp 660-664 © (2013) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMM.315.660

 

(5)Articles in Conferences

1.Mohd Amri Lajis, M.N. Abu Bakar, Hamidon Musa, and Arshad Kassim (2001). The Electrical Discharge Machining of Tungsten Carbide. Malaysian Science and Technology Congress (MSTC 2001), Malacca, Malaysia. 

2.M.A. Lajis, H. Musa, and M.N. Abu Bakar (2002). Machining Characteristics of Tungsten Carbide Using EDM. World Engineering Congress (WEC 2002), Kuching, Sarawak, Malaysia.

3.Mohd Azlis Sani Jalil, M. Hameedullah, M.A. Lajis, C.K. Sia, K.Y. Leong, Azmi Ruhani (2005). Development of Al-Cu-SiCp Metal Matrix Composite For Automotive Application. International Conference on Manufacturing and Material Processing (ICMM), March 14-15, Universiti Malaya, Kuala Lumpur.

4.S. Thamizhmanii, M.A. Lajis, S. Hasan (2006). Comparison of Surface Roughness Between Non-Ferrous Metals At Low Constant Sliding Speed With Different Ball Diameters. International Conference on Manufacturing and Material Processing (ICMM), March 14-15, Universiti Malaya, Kuala Lumpur.

5.S. Thamizhmanii, Mohd Amri Lajis, S. Hasan (2006). Surface Roughness and Cutting Forces While Machining Cr-Mo Alloy Steel Using Coated Ceramic Tool. International Conference on Manufacturing Science and Technology (ICOMAST), August 28-30, Ayer Keroh, Melaka.

6.A.K.M. Nurul Amin, Shuraini Dolah, Marlina Mahmud, M.A. Lajis (2006). Influence of Online Workpiece Heating on Chatter and Machinability of Hardened Steel AISI D2 in End Milling. Proceedings of the 3rd BSME-ASME International Conference on Thermal Engineering, Dec 20-22, Dhaka, Bangladesh.

7.A.K.M. Nurul Amin, Shuraini Dolah, Marlina Mahmud, M.A. Lajis (2007). Effects of Workpiece Preheating on Surface Roughness, Chatter and Tool Performance During End Milling of AISI D2 Tool Steel. The 10th International Conference on Advances in Materials and Processing Technologies (AMPT): Oct 7-11, Daejon, Korea.

8.M.A. Lajis, A.K.M. Nurul Amin, A.N. Mustafizul Karim, AM.K. Hafiz (2007). Prediction of Surface Roughness in Hard Milling of AISI D2 Tool Steel. The 4th International Conference on Leading Edge Manufacturing in the 21st Century (LEM 2007), Nov 7-9, Fukuoka, Japan.

9.A.M.K. Hafiz, A.K.M.N. Amin, M.A. Lajis (2007). Experimental Investigation on Surface Roughness During End Milling of AISI H13 Hardened Tool Steel. The 4th International Conference on Leading Edge Manufacturing in the 21st Century (LEM 2007), Nov 7-9, Fukuoka, Japan.

10.M.A. Lajis, A.K.M. Nurul Amin, A.N. Mustafizul Karim, AM.K. Hafiz (2007). Modelling and Prediction of Tool Life by Response Surface Methodology in Hard Milling of AISI D2 Tool Steel. The 18th International DAAM Symposium on Intelligent Manufacturing and Automation, Oct 24-27, Zadar, Croatia.

11.Hafiz, A.M.K.; Amin, A.K.M.; Lajis, M.A. (2007). Development of Tool Life Prediction Model of TiAlN Coated Tools During The High Speed Hard Milling of AISI H13 Steel. The 18th International DAAM Symposium on Intelligent Manufacturing and Automation, Oct 24-27, Zadar, Croatia.

12.A.M.K. Hafiz, A.K.M. Nurul Amin, A.N. Mustafizul Karim, M.A. Lajis (2007). Development of Tool Life Prediction Model for PCBN Inserts During The High Speed End Milling of AISI H13 Hardened Tool Steel. International Conference on Mechanical Engineering (ICME 2007), Dec 29-31, Dhaka, Bangladesh.

13.AM.K. Hafiz, A.K.M.N. Amin, A.N.M. Karim, M.A. Lajis (2007). Development of Surface Roughness Prediction Model Using Response Surface Methodology in High Speed End Milling of AISI H13 Tool Steel. The International Conference on Industrial Engineering and Engineering Management (IEEM 2007), Dec 2-4, Singapore.

14.M.A. Lajis, A.N. Mustafizul Karim, A.K.M. Nurul Amin(2008). Modelling and Optimization of Tool Life in End Milling of AISI D2 Hardened Steel. 6th CIRP        International Conference on Intelligent Computation in       Manufacturing Engineering (CIRP ICME ’08), ISBN 978-88-900948-7-3. July 23-25, Naples, Italy.

15.M.A. Lajis, A.K.M. Nurul Amin, A.N. Mustafizul Karim, AM.K. Hafiz (2008). Hot Machining in End Milling of Hardened Steel AISI D2. The International Conference on Advances in Materials and Processing Technologies (AMPT 2008). Nov 2-5, Manama, Bahrain.

16.Turnad L.Ginta, A.K.M. Nurul Amin, M.A. Lajis (2008). Tool Life Improvement of Uncoated WC-Co Insert in End Milling Titanium Alloy Ti-6Al-4V Through Workpiece Preheating. The International Conference on Advances in Materials and Processing Technologies (AMPT 2008), Nov 2-5, Manama, Bahrain.

17.A.M.K. Hafiz, A.K.M. Nurul Amin, M.A. Lajis, A.U. Patwari (2008). Experimental investigation and prediction of tool life during hot milling of AISI H13 tool steel. The International Conference on Advances in Materials and Processing Technologies (AMPT 2008), Nov 2-5, Manama, Bahrain.

18.M.A. Lajis, A.K.M. Nurul Amin, A.N.Mustafizul Karim, Turnad L.Ginta (2008).      Theoritical and Experimental Investigation in Prediction of Tool Life in Preheated    Machining of AISI D2 Hardened Steel, 2nd International & 23rd All India    Manufacturing Technology Design and Research (AIMTDR) Conference, Dec 15-17,       IIT Madras, Chennai, India.

19.M.A. Lajis, A.K.M. Nurul Amin, A.N.Mustafizul Karim, Turnad L.Ginta, A.U. Patwari (2008). Preheated Machining in End Milling of Hardened Steel AISI D2. 9th Global Congress on Manufacturing and Management (GCMM2008), Nov 12-14, Gold Coast, Australia.

20.Turnad L.Ginta, A.K.M. Nurul Amin, A.N.M. Karim, Anayet U. Patwari, M.A. Lajis (2008). Machinability Improvement in End Milling Titanium Alloy Ti-6Al 4V”, International Conference on Science & Technology: Applications in Industry & Education (ICSTIE), Dec 12-13, Universiti Teknologi Mara (UiTM), Pinang, Malaysia.

21.Md. Anayet U Patwari, A.K.M. Nurul Amin, Turnad L. Ginta, M.A. Lajis (2008). Prediction of Surface Roughness in End Milling of Preheated Ti6Al4V Alloy Using Coupled Artificial Neural Network and Response Surface Methodology. 4th BSME-ASME International Conference on Thermal Engineering, December 27-29, Dhaka, Bangladesh.

22.Turnad L.Ginta, A.K.M. Nurul Amin, A.N.M. Karim, M.A. Lajis, Anayet U Patwari (2008). Tool Wear Morphology and Chip Segmentation in End Milling Titanium Alloy Ti–6Al–4V. Curtin University of Technology Science and Engineering International Conference (CUTSE), Nov 24-27th, Miri, Sarawak, Malaysia.

23.Turnad L.Ginta, A.K.M. Nurul Amin, A.N.M. Karim, M.A. Lajis, Anayet U Patwari (2008). Modelling and Optimization of Tool Life and Surface Roughness For End Milling Titanium Alloy Ti–6Al–4V Using Uncoated WC-Co Inserts. Curtin University of Technology Science and Engineering International Conference (CUTSE), Nov 24-27th, Miri, Sarawak, Malaysia.

24.Turnad L. Ginta, A.K.M. Nurul Amin, A.N.M. Karim, M.A. Lajis (2008). Tool Life Prediction by Response Surface Methodology For End Milling Titanium Alloy Ti–6Al–4V Using PCD Inserts. International Joint Seminar in Engineering (IJSE), August 4-5, Jakarta, Indonesia.

25.Turnad L. Ginta, A.K.M. Nurul Amin, A.N.M. Karim, M.A. Lajis (2007). Performance of Uncoated WC-CO Inserts In End Milling Titanium Alloy Ti-6Al-4V. Proceedings of the International Conference onInstrumentation, Communication and Information Technology (ICICIT), August 8-9, Bandung, Indonesia.

26.M.A. Lajis, A.K.M. Nurul Amin, A.N. Mustafizul Karim, Turnad L. Ginta (2009). Performance Evaluation of PCBN in End Milling of Hardened Steel AISI D2 Under Room and Preheated Machining Conditions. The International Conference on Advances in Materials and Processing Technologies (AMPT 2009), Oct 26-29, IIUM, Kuala Lumpur, Malaysia.

27.M.A. Lajis, A.K.M. Nurul Amin, A.N. Mustafizul Karim, Turnad L. Ginta (2009). Modelling and Optimization in End Milling of Hardened Steel AISI D2 Using Coated carbide Inserts. The International Conference on Advances in Materials and Processing Technologies (AMPT 2009), Oct 26-29, IIUM, Kuala Lumpur, Malaysia.

28.Turnad L. Ginta, A.K.M. Nurul Amin, A.N. Mustafizul Karim, M.A. Lajis (2009). Surface Roughness And Surface Integrity of End Milled Titanium Alloy Ti-6al-4v At Room Temperature and Preheated Machining. The International Conference On Advances In Materials And Processing   Technologies (AMPT 2009), Oct 26-29, IIUM, Lumpur, Malaysia.

29.Turnad L. Ginta, A.K.M. Nurul Amin, A.N. Mustafizul Karim, M.A. Lajis (2009). Surface Roughness Modelling For End Milling Titanium Alloy Ti-6al-4v Under Room Temperature and Preheated Machining. The International Conference on Advances in Materials and Processing Technologies (AMPT 2009), Oct 26-29, IIUM, Kuala Lumpur, Malaysia.

30.Mohamed Elhadie, A. N. Mustafizul Karim, A. K. M. Nurul Amin, M.A. Lajis (2011). Development of Mathematical Cost Models for Room Temperature End-milling of AISI D2 Tool Steel. Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management (IEOM 2011), January 22–24, Kuala Lumpur, Malaysia.

31.Mohamed Elhadie, A. N. Mustafizul Karim, A. K. M. Nurul Amin, M.A. Lajis (2011). Development of Mathematical Cost Models for Preheated End-milling of AISI D2 Tool Steel. Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management (IEOM 2011), January 22–24, Kuala Lumpur, Malaysia.

32.M.A. Lajis, A.K.M. Nurul Amin, A.N. Mustafizul Karim (2012). Surface Integrity in Hot Machining of AISI D2 Hardened Steel. The 10th Asia-Pacific Conference on MaterialsProcessing (APCMP 2012), Jinan, China, June 14-17 (accepted for conference and publication).

33.M.F. Abdul Hamid, M.A. Lajis, (2012). High Performance in EDM Machining of AISI D2Hardened Steel. The 10th Asia-Pacific Conference on MaterialsProcessing (APCMP 2012), Jinan, China, June 14-17 (accepted for conference and publication).

34.N.A.H. Jasni, M.A. Lajis (2012). Tool Wear Performance of TiAlN/AlCrN Multilayer Coated Carbide Tool in Machining of AISI D2 Hardened Steel. 2nd International Conference on Key Engineering Materials (ICKEM 2012), Feb 26-28, Singapore.

35.Turnad Ginta, M.A. Lajis (2012). Suppressed Vibrations During Thermal-Assisted Machining of Titanium Alloy Ti-6Al-4V Using PCDInserts. The International Conference on Production, Energy and Reliability (ICPER2012), June 12-14, Kuala Lumpur, Malaysia.

36.M.A. Lajis, N.K. Yusuf, M.Z. Noh, M. Ibrahim (2013). Effect of Chip Size on Direct Recycling of Aluminium Chips (AA6061) in The Hot Press Forging Process. International Solid Waste Association (ISWA) World Congress, 7-11 Oct, Vienna, Austria.

37.M.A. Lajis, N.K. Yusuf, M.Z. Noh, M. Ibrahim (2013). Mechanical Properties and Surface Integrity of Direct Recycling Aluminium Chips (AA6061) by Hot Press Forging Process. 11th Global Conference on Sustainable Manufacturing (GCSM), 23-25 Sept, Berlin, Germany.

 

 

      mok.jpg - 2.70 KB    

ORICC & Center of Excellent

ORICC

MiNTSRC logo recess LOGO EMC